XHR-150 Manual Plastic Rockwell Hardness Tester
l Umatshini unomsebenzi ozinzileyo, ixabiso elichanekileyo lokubonisa kunye nokusebenza okulula.
l I-shaft yokulayisha engena-friction, amandla okuvavanya ukuchaneka okuphezulu
l I-HRL, i-HRM, isikali se-HRR sinokufundwa ngokuthe ngqo kwi-gauge.
l Ithatha isithinteli soxinzelelo lweoyile echanekileyo, isantya sokulayisha sinokulungiswa;
l Inkqubo yokuvavanya ngesandla, akukho mfuneko yokulawula umbane;
l Ukuchaneka kuhambelana neMigangatho ye-GB / T 230.2, ISO 6508-2 kunye ne-ASTM E18
Uluhlu lokulinganisa: 70-100HRE, 50-115HRL, 50-115HRR, 50-115HRM
Unyanzeliso loVavanyo lokuqala: 98.07N (10Kg)
Amandla ovavanyo: 588.4, 980.7, 1471N (60, 100, 150kgf)
Max.ubude beqhekeza lovavanyo: 170mm (okanye 210mm)
Ubunzulu bomqala: 135mm (okanye 160mm)
Uhlobo lwe-indenter: ф3.175mm, ф6.35mm, 12.7mm i-indenter yebhola
Iyunithi yokubonisa: 0.5HR
Uboniso loBulukhuni: igeyiji yokucofa
Isikali sokulinganisa:HRG, HRH, HRE, HRK, HRL, HRM, HRP, HRP, HRR, HRS, HRV
Imilinganiselo: 466 x 238 x 630mm/520 x 200 x 700mm
Ubunzima: 78/100kgs
UMtshini ongundoqo | Iseti e-1 | Umqhubi weScrew | I-PC eyi-1 |
ф3.175mm, ф6.35mm, 12.7mmI-Inter yebhola | I-1 PC NGANYE | Ibhokisi encedisayo | I-PC eyi-1 |
ф3.175mm, ф6.35mm, 12.7mm ibhola | I-1 PC NGANYE | Incwadana yokusebenza | I-1 iPc |
I-Anvil (Enkulu, ePhakathi, "V" -Milo) | I-1 PC NGANYE | Isatifikethi | I-1 iPc |
I-Standard Plastic Rockwell Hardness Block | 4 PCS |